Home > Gate Openers >

Power Strip with Application - LM183
Power Strip with Application - LM183


 
Alternative Views:


List Price: $159.00
Price: $125.00
Savings: $34.00

Stock Status:Available

Availability: Usually Ships in 24 to 48 Hours
Product Code: LM183-AP

DETAILS
 
Compatible with ALEKO® gate opener models.

ALEKO LM183 POWER STRIP with application is remote controlled power strip
with an on-board GSM modem. The purpose of this device is to do the real time and interactive GSM remote control by means of a GSM phone. That is suitable for home and industrial application.


PACKAGE INCLUDES:
  • 1(One) Set of GSM Switch


Accessories
Universal Touch Wired Keypad - LM175P Black Stranded Wire - LM150 - 5-Core - 40 Feet Universal Metal Wired Keypad - LM177 Wireless Keypad - 433.92 Mhz - LM172
Price: $55.00

Add
Price: $60.00

Add
Price: $99.00

Add
Price: $49.00

Add
Universal Touch Wired Keypad - LM175P Black Stranded Wire - LM150 - 5-Core - 40 Feet - ALEKO Universal Metal Wired Keypad - LM177 Wireless Keypad - 433.92 Mhz - LM172
Universal WiFi Remote Control Switch - 5-Channel - LM181 Electric Lock - LM148 -24V
Price: $125.00

Add
Price: $79.00

Add
Universal WiFi Remote Control Switch - 5-Channel - LM181 Electric Lock - LM148 -24V

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 do not change the password like it suggests in the June 24, 2015
Reviewer: G. Granger from United States  
are irreplacable.Once you install a standard size SIM card (AT&T only), the GSM light should start blinking to indicate you have a GSM signal. After this, you push both switch buttons on the side of the unit. The STS light will blink a few times, letting you know it is ready to program. Call the SIM card in the unit with your phone to associate it with your phone. Last, push the switch for the socket you want to trigger by calling with your cell phone.After you do all that, the socket will be triggered when you call the SIM card installed in the power strip.However, when you call, the socket that you programmed will only temporarily switch on for a second and then turn off. In order to make the socket turn on and stay on, you have to change the mode for the socket to "MODE1." You can do this by sending a text command according to the instructions in the chingrish manual.Also, do not change the password like it suggests in the manual. Mine stopped accepting txt commands when I did this.

Was this review helpful to you?