Home > Gate Openers > Accessories > Car Detectors >

Gate Vehicle Opening Sensor Kit - A100
Gate Vehicle Opening Sensor Kit - A100


 
Alternative Views:


Price: $75.00

Stock Status:

Out of Stock



Availability: Usually Ships in 24 to 48 Hours
Product Code: A100-AP

DETAILS
 

ALEKO A100 Gate Vehicle Opening Sensor Kit For Sliding Gate Openers AC1400/2000, AR1450/2000 Series

Features

  • Allows your vehicle to exit the property automatically, without hand operation.
  • The gates open automatically when the loop detector senses the vehicle moving.

200ft one stranded wire is included!

1. Supply power : AC 110V or 220V, ±10%, 50/60HZ , AC/DC 12V or 24V

2. Consuming power : normal 1.0W, operation 3.6W

3. Operating temperature : -55℃~125℃, humidity 30%-85%

4. Size : 105mm(H) ×75mm(W) ×41mm(D)

5. Quality of material : aluminum, aluminum

6. Weight : 352g

7. Detection method : Pass detection mode( Frequency change mode)

8. Detection range : All of vehicle

9. Sensing range : LOOP COIL width over vehicle space distance

10. Detection speed : 0Km-180Km/h

11. Detect time : <15ms

12. Sensitivity: High sensitivity ~ Low sensitivity (8 Level)

13. Alignment : Automatic alignment system

14. Timer function : 0-14 Second control the time by option

15. Reset function : Reset bottom when error occur

(Automatic:30 sec, Manual:Option)

16. Output singnal : PRESENT RELAY and PULSE RELAY, relay capacity is 220VAC/3A,110VAC/3A,

24VDC/10A


PACKAGE INCLUDES:
  • ALEKO A100A adapter;

  • Plastic connector;
  • Loop Wire.


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  4 of 4 people found the following review helpful:
 
5 of 5 November 12, 2015
Reviewer: Matt Flierl from WEST PALM BEACH, FL United States  
Recently purchased and installed the 1400 model.
The unit itself is small and compact, and looks to be rather well built.
The instructions could be a lot more detailed, you need to be mechanically inclined to figure some things out. Some of the exposed hardware should be hot dipped galvanized, instead seems to be simple zinc.
I had to make some modifications to my chain link gate, but that was not unexpected.
Took about 7 hours from start to finish with modifications to gate included to install. Runs well so far.
I liked the price and hopefully I'll get 10 years out out it.

Was this review helpful to you?