Home > Home > Clearance > Outdoor Clearance >

Roller Dual Swing Gate Opener - RL1350
Roller Dual Swing Gate Opener - RL1350 - ALEKO

Alternative Views:

List Price: $999.00
Price: $629.00
Savings: $370.00

Stock Status:Available

Availability: Usually Ships in 24 to 48 Hours
Product Code: RL1350-AP


ALEKO RL1350 Roller Swing Gate Opener is one of the newest gate openers out there, instead of swinging the gates it will roll them on your driveway making it more reliable and match easy to operate.

This gate opener will save you time and energy, no more need to get out of your car to open or close your gates, from now on you will stay warm and dry in your vehicle. Are you sick of getting out of your car, truck, or off your horse to manually open and close your gate, especially in bad weather? The ALEKO RL1350 roller swing gate opener is designed to automatically open dual, gates that are up to 24-Feet long (12 ft each leaf) and 1400 lbs (700 lb each leaf).

This high quality, affordable gate opener is compatible with a lot of accessories. The gate opener is easy to install in 2-3 hours, and all mounting hardware is included. Also included is a control box with a built-in receiver, and detailed installation instructions. Also comes with a 1 year Aleko warranty.

  • Easy installation and easy operation
  • Luxury appearance, alarm lamp flashes during operation
  • Built in adjustable auto-close, Emergency release key in case of power failure
  • Can be equipped with a wire range of accessories
  • Auto-lift function allows the 12 inches tolerance on the surface of uneven ground
  • Shipping package size 16' x 13' x 12'
  • - 2 (Two) Rolling Swing Gate Openers
  • - 1 (One) Control Box
  • - 2 (Two) Plastic Corrugated Tubes
  • - 2 (Two) Release Keys
  • - 6 (Six) Expansion Bolts
  • - 2 (Two) Thrust Block Plate
  • - 2 (Two) Magnetic Cylinders
  • - 1 (One) Installation Instruction Manual

Remote Control for Gate Opener - RL1350 - LM126
Price: $19.00

Remote Control for Gate Opener - RL1350 - LM126

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 3 Write a review »

  1 of 1 people found the following review helpful:
4 of 5 Great opener for large gates October 28, 2019
Reviewer: Will G from Fayetteville AR  
I have a double 24'x8' cedar gate that catches a ton of wind. Broke multiple actuator arms of old style gate openers and was excited when I found this solution. This gate locks securely in place when closed so wind has no effect. Also love how you can set to open well past 90 degrees. Instruction translation wasnt the best but managed to figure it out. My only gripe is control panel doesn't appear to have open/stop/close terminal for wiring external switch. On previous gate openers I used this terminal and common terminal to wire in smart switch so I can operate via Google home voice controls.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
4 of 5 Great product but mac and cheese boxes have better July 1, 2016
Reviewer: JohnJohnJohn from United States  
This opener works very well.  I do wish they offered a single drive option.  I would have rated it 5 stars, but the instructions were abysmal.  The instructions read like they were translated from English to a foreign language and then back to English- using Bing both times.  Seriously, the word "firstly" is in the instruction manual.  I know it's a word (after looking it up), but I cannot recall, at anytime in my reading history, having ever seen it used.  And for what the instructions lack in their translating finesse, they will further perplex because there is very little detail provided.  The instructions are more of an overview rather than a full installation plan.  I'm a fairly smart guy and can figure most anything mechanical out- this installation took me a while because the instructions were that inadequate.  Once I understood the operation and what the instructions "meant" to say, I would say this is about a 4 hour installation.  The instructions do provide some measurements-

Was this review helpful to you?

  1 of 1 people found the following review helpful:
4 of 5 Great product but mac and cheese boxes have better July 1, 2016
Reviewer: JohnJohnJohn from United States  
this by adding a caster wheel to the gate.  The wheel motors run on 24VDC.  The instructions say to use a dual core wire- I used some extra romex I had remaining from another project.  I believe lamp wire would be ok and cheaper.  There is a "learn travel" option but it made the gate run backwards- I think.  I gave up trying to figure that out and just pushed open and it worked fine.  The instructions do not say if this motor was designed to open inward or outward- I just had to figure it out.  I got it to work for me by making it pull the gate open and push close.  We've been using this daily for about 3 weeks and it has operated perfectly.**** 1 year later update****  This motor gets used everyday at least twice.  It has been very reliable.  I built a whole new solid treated lumber gate (12' x 6') and the motor opens it with ease.  I also rewired it with 14 gauge twisted speaker wire with no issues.  This is an awesome gadget,  but I still stand by my comments about the instructions.

Was this review helpful to you?