Home > Gate Openers > Sliding Gate Openers >

Heavy-Duty Sliding Gate Opener - AR5750 - Accessory Kit ACC4
Heavy-Duty Sliding Gate Opener - AR5750 - Accessory Kit ACC4 - ALEKO


 
Alternative Views:


Price: $759.00

Stock Status:Available

Availability: Usually Ships in 24 to 48 Hours
Product Code: AR5700ACC-AP

DETAILS TECHNICAL SPECS
 
PRODUCT DESCRIPTION:

4 HP equivalent motor of 120 V AC attached to run a chain driven sliding gate opener. The motor provides exceptional torque and continuous flaw of operation. Motor withstand load up to 5700 lbs and up to 40 ft In length, 20 feet racks are included (6 pcs Gear Racks, 3.3 Ft each, total: 20 Ft); if your gates more 20 ft in length just purchase an extra racks in "Gear Racks" section.


FEATURES:
  • Easy to install
  • Midway mode
  • Get the desired chain tension by adjusting the chain bolts
  • Reliable rolling code technology
  • Emergency release key in case of power failure
  • Stop/Reverse in case of obstruction during gate closing
  • Built in adjustable auto-close (0, 30, 60, 90 seconds)
  • Built in max. 90 seconds Motor running time (MRT) for multiple safety protection
  • Reliable electromagnetism limit for easy adjustment
  • Optional accessories

ALEKO® AR5750 Heavy-Duty Sliding Gate Opener. How it works.
PACKAGE INCLUDES:
  • - 1 (One) Sliding Gate Opener Unit
  • - 1 (One) Set of ALEKO 20Ft Nylon Gear Racks reinforced with a metal insert 3.3 Ft each, 6pcs
  • - 1 (One) Mounting metal base
  • - 2 (Two) 433MHz remotes LM122
  • - 1 (One) Keypad LM172, wireless
  • - 1 (One) Keypad metal cover
  • - 1 (One) Push button LM147, wired
  • - 1 (One) Set of Photocell LM102, wired
  • - 1 (One) Set of accessories and mounting hardware for easy installation
  • - 1 (One) User Manual with step by step installation instructions

Accessories
Fiberglass Reinforced Nylon Gear Rack with Metal Insert - 3.3 Feet - Set of 4 Sliding Gate Opener - AR900 - Back-up Kit ACC2 Sliding Gate Opener - AR900 - Basic Kit Fiberglass Reinforced Nylon Gear Rack with Metal Insert - 3.3 Feet
Price: $55.00

Add
Price: $549.00

Add
Price: $319.00

Add
Price: $28.00

Add
Fiber-Glass Reinforced Nylon Gear Rack with Metal Insert - 3.3 Feet - Set of 4 Sliding Gate Opener - AR900 - Back-up Kit ACC2 - ALEKO Sliding Gate Opener - AR900 - Basic Kit - ALEKO Fiber-Glass Reinforced Nylon Gear Rack with Metal Insert - 3.3 Feet
Solar Compatible Gear Driven Sliding Gate Opener - AR750 - Basic Kit Heavy-Duty Sliding Gate Opener - AR5750 - Accessory Kit ACC4
Price: $229.00

Add
Price: $759.00

Add
Gear Driven Sliding Gate Opener - AR750 - Basic Kit - ALEKO Heavy-Duty Sliding Gate Opener - AR5750 - Accessory Kit ACC4 - ALEKO

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 Ar5760 linear gate operator December 3, 2020
Reviewer: Ellis GunterJr from WILLIAMSTON, SC United States  
Fairly reliable, but, I've replaced the board three times.  1st opener lasted 7 years and this purchase is a replacement package.(Didn't receive the keypad shown in the package)  Glitch in the unit that caused failure was when the gate is open and past the stop switch, if someone tries to close it with the safety beam signal broken, it automatically opens further against the ed positive stop.  With torque limit set for the gate weight it puts excess pressure on the unit which is enought to break the mechanical release.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
5 of 5 November 14, 2017
Reviewer: Eloy Santos from Hanford , CA United States  


Was this review helpful to you?